Air Duct Cleaning
Our Process:
1. Install manufactured Sandwich and CAM access doors by Duct Mate manufacturer. Doors installed for proper access to duct. Also will enter the duct through flex duct connections on the supply duct, if applicable.
2. All duct will be put under negative pressure with our High efficiency vacuum/collection system which is detailed below. This will collect all contaminants.
3. Clean all interior supply/return duct with high pressured air whips and lance system & Aire Brush system.
4. All supply diffusers & return grilles will be wiped down with non-shedding wipes.
5. All flex connections that were disconnected will be connected with two nylon straps per joint, one on the flex & the other on the outside of the insulation, if applicable.
Abatement System
Collectors shall be fan powered, HIGH EFFICIENCY dust and particulate collection systems. The collectors shall be rated at 4500cfm; self-contained with appropriate components to adequately prevent dirt and debris loosened from entering the diffuser plenums. The filtration within the collection system shall be as a minimum, three stage filtration with the final being HEPA 99.99% efficient on .3 micron at rated flow.